What are the basic structures of an inductor?The radial inductor manufacturer of Getwell tells you the story.
An inductor is a device that can convert electrical energy into magnetic energy storage. The structure of mutual inductor is similar to that of a transformer, but there is only one winding. The inductor has certain inductance and only blocks the change of current.
If the inductorium has no current, it will try to stop the current from flowing when the circuit is connected.If is running through a current, it will try to keep the current constant when the circuit is disconnected.Inductors are also called chokes, reactors, and dynamic reactors.
Inductor structure:
Inductor usually consists of skeleton, coil, shield, packaging material, magnetic core or iron core and so on.
1. The framework
The frame generally refers to the bracket for winding the coil.Some large fixed inductors or adjustable inductors.Most of it is wrapped around the frame with enameled wire.The magnetic core or copper core or iron core is then installed in the frame cavity to increase its inductance.Frames are usually made of plastic, bakelite, and ceramic.It can be made into different shapes according to actual needs.
2. The winding
Winding refers to a set of coils with specified functions and is the basic component of inductor.The winding can be divided into monolayer and multilayer.The single-layer winding has two forms: dense winding and interwinding.Multilayer winding has layering winding, hybrid winding, honeycomb winding and other winding forms.
3. Core and Stripe
Magnetic core bar and magnetic strip are generally made of nickel-zinc ferrite or manganese-zinc ferrite and other materials, with "I-shaped", column, cap, E, tank and other shapes.
Radial power inductors Pin type power Inductors
4. The core
Core materials mainly include silicon steel sheet, permalloy, etc., and its shape is mostly "E" type.
5. Shield
In order to prevent the magnetic field generated by some inductors from affecting the normal operation of other circuits and components, a metal shielding layer is added to inductors.When the inductor is shielded, the coil loss increases and the Q value decreases.
6. Packaging materials
Some inductors, after winding, use wrapping material to seal the coil, core, etc.The packaging materials are plastic or epoxy resin.
The above is organized and published by the radial inductor supplier.If you do not understand, welcome to consult us!Alternatively, search "inductorchina.com"
Post time: Apr-08-2021