Lowest Price for Small Inductor Hollow Axial Coil - SMD molding Power Inductor -SGT | GETWELL – Getwell
Lowest Price for Small Inductor Hollow Axial Coil - SMD molding Power Inductor -SGT | GETWELL – Getwell Detail:
SMD Molding power choke feature & characteristic:
◆high current rating
◆high frequency range up to 5 MHz
◆very low DC resistance
◆shielded construction
◆low noise
◆ultra low cost
◆Rohs compliant
Application:
◆PDA/Notebook/Desktop/Server applications
◆DC/DC comverter
◆inductor for general purpose use
Inductor smd datasheet
Part Number | A(mm) | B(mm) | C(mm) | D(mm) | E(mm) | SPQ | |||||||
0312 | 3.50±0.20 | 3.2±0.20 | 1.00±0.20 | 0.70±0.20 | 1.20±0.20 | 4K | |||||||
0302 | 3.50±0.20 | 3.2±0.20 | 1.80±0.20 | 0.70±0.20 | 1.20±0.20 | 3K | |||||||
0412 | 4.45±0.25 | 4.06±0.25 | 1.00±0.20 | 0.76±0.30 | 2.00±0.20 | 3K | |||||||
0402 | 4.45±0.25 | 4.06±0.25 | 1.80±0.20 | 0.76±0.30 | 2.00±0.20 | 4K | |||||||
0512 | 5.70±0.30 | 5.20±0.20 | 1.00±0.20 | 1.10±0.30 | 2.50±0.30 | 3K | |||||||
0515 | 5.70±0.30 | 5.20±0.20 | 1.30±0.20 | 1.10±0.30 | 2.50±0.30 | 3.5K | |||||||
0518 | 5.70±0.30 | 5.20±0.20 | 1.60±0.20 | 1.10±0.30 | 2.50±0.30 | 3K | |||||||
0612 | 7.00±0.30 | 6.60±0.30 | 1.00±0.20 | 1.8±0.30 | 3.00±0.30 | 3K | |||||||
0615 | 7.00±0.30 | 6.60±0.30 | 1.30±0.20 | 1.8±0.30 | 3.00±0.30 | 2K | |||||||
0618 | 7.00±0.30 | 6.60±0.30 | 1.60±0.20 | 1.8±0.30 | 3.00±0.30 | 1.5K | |||||||
0602 | 7.00±0.30 | 6.60±0.30 | 1.80±0.20 | 1.8±0.30 | 3.00±0.30 | 1.5K | |||||||
0624 | 7.00±0.30 | 6.60±0.30 | 2.20±0.20 | 1.8±0.30 | 3.00±0.30 | 0.5K | |||||||
0603 | 7.30±0.30 | 6.60±0.30 | 2.80±0.20 | 1.8±0.30 | 3.00±0.30 | 0.5K | |||||||
0605 | 7.30±0.30 | 6.60±0.30 | 4.80±0.20 | 1.8±0.30 | 3.00±0.30 | 0.5K | |||||||
1004 | 11.00±0.50 | 10.00±0.30 | 3.80±0.20 | 2.3±0.30 | 3.00±0.30 | 0.5K | |||||||
1005 | 11.00±0.50 | 10.00±0.30 | 4.80±0.20 | 2.3±0.30 | 3.00±0.30 | 0.5K | |||||||
1235 | 13.50±0.50 | 12.50±0.30 | 3.30±0.20 | 2.3±0.30 | 4.70±0.30 | 0.5K | |||||||
1205 | 13.50±0.50 | 12.50±0.30 | 4.80±0.20 | 2.3±0.30 | 4.70±0.30 | 0.5K | |||||||
1206 | 13.50±0.50 | 12.50±0.30 | 5.70±0.30 | 2.3±0.30 | 4.70±0.30 | 0.5K | |||||||
1265 | 13.50±0.50 | 12.50±0.30 | 6.20±0.30 | 2.3±0.30 | 4.70±0.30 | 0.5K | |||||||
1707 | 17.60±0.40 | 16.90±0.30 | 6.70±0.30 | 2.10±0.30 | 11.90±0.30 | 0.3K | |||||||
Molding Type Power Inductor TMPC0312H Series |
|||||||||||||
Part Number | Inductance L0(uH) | I rms (A) typ. | I sat (A) typ. | DCR (mΩ)typ.@25℃ | DCR (mΩ)max.@25℃ | ||||||||
TMPC0312H-R47MG | 0.47±20% | 5.00 | 7.20 | 25 | 30 | ||||||||
TMPC0312H-R56MG | 0.56±20% | 4.50 | 6.60 | 31 | 36 | ||||||||
TMPC0312H-R68MG | 0.68±20% | 4.00 | 6.10 | 34 | 40 | ||||||||
TMPC0312H-R82MG | 0.82±20% | 3.50 | 5.80 | 41 | 48 | ||||||||
TMPC0312H-1R0MG | 1.00±20% | 3.30 | 5.50 | 50 | 60 | ||||||||
TMPC0312H-1R5MG | 1.50±20% | 3.00 | 4.00 | 71 | 85 | ||||||||
TMPC0312H-2R2MG | 2.20±20% | 2.70 | 3.40 | 98 | 115 | ||||||||
TMPC0312H-3R3MG | 3.30±20% | 2.00 | 3.10 | 191 | 210 | ||||||||
TMPC0312H-4R7MG | 4.70±20% | 1.60 | 2.80 | 266 | 293 | ||||||||
TMPC0312H-5R6MG | 5.60±20% | 1.50 | 2.20 | 310 | 360 | ||||||||
TMPC0312H-6R8MG | 6.80±20% | 1.40 | 2.00 | 360 | 400 | ||||||||
TMPC0312H-8R2MG | 8.20±20% | 1.20 | 1.70 | 420 | 463 | ||||||||
TMPC0312H-100MG | 10.0±20% | 1.00 | 1.40 | 498 | 550 | ||||||||
Molding Type Power Inductor TMPC0302H Series |
|||||||||||||
Part Number | Inductance L0(uH) | I rms (A) typ. | I sat (A) typ. | DCR (mΩ)typ.@25℃ | DCR (mΩ)max.@25℃ | ||||||||
TMPC0302H-R10YG | 0.10±30% | 10.50 | 14.00 | 6.6 | 9 | ||||||||
TMPC0302H-R47MG | 0.47±20% | 7.00 | 9.00 | 19.7 | 23 | ||||||||
TMPC0302H-R68MG | 0.68±20% | 5.50 | 7.00 | 25.5 | 29 | ||||||||
TMPC0302H-1R0MG | 1.00±20% | 4.00 | 5.00 | 32.0 | 38 | ||||||||
TMPC0302H-2R2MG | 2.20±20% | 3.50 | 3.70 | 65.0 | 75 | ||||||||
TMPC0302H-3R3MG | 3.30±20% | 3.00 | 3.50 | 125.0 | 145 | ||||||||
TMPC0302H-4R7MG | 4.70±20% | 2.60 | 3.00 | 172.0 | 200 | ||||||||
TMPC0302H-5R6MG | 5.60±20% | 2.20 | 2.60 | 205.0 | 238 | ||||||||
TMPC0302H-6R8MG | 6.80±20% | 1.90 | 2.20 | 260.0 | 300 | ||||||||
TMPC0302H-100MG | 10.0±20% | 1.40 | 1.60 | 366.0 | 422 | ||||||||
Molding Type Power Inductor TMPC0402HP Series |
|||||||||||||
Part Number | Inductance L0 (uH)±20% | I rms (A) typ. | I sat (A) typ. | DCR (mΩ)typ.@25℃ | DCR (mΩ)max.@25℃ | ||||||||
TMPC0402HP-R33MG-Z02 | 0.33 | 10.00 | 18.00 | 7.8 | 8.6 | ||||||||
TMPC0402HP-R47MG-Z02 | 0.47 | 8.00 | 12.00 | 11.2 | 14 | ||||||||
TMPC0402HP-R68MG-Z02 | 0.68 | 7.00 | 10.00 | 16.0 | 19 | ||||||||
TMPC0402HP-1R0MG-Z02 | 1.00 | 5.00 | 8.50 | 22.0 | 27 | ||||||||
TMPC0402HP-2R2MG-Z02 | 2.20 | 4.00 | 6.00 | 51.0 | 61 | ||||||||
TMPC0402HP-3R3MG-Z02 | 3.30 | 3.50 | 4.00 | 69.0 | 76 | ||||||||
TMPC0402HP-4R7MG-Z02 | 4.70 | 2.60 | 3.50 | 95.0 | 105 | ||||||||
TMPC0402HP-6R8MG-Z02 | 6.80 | 2.10 | 2.80 | 150.0 | 172 | ||||||||
TMPC0402HP-100MG-Z02 | 10.00 | 1.80 | 2.30 | 215.0 | 243 | ||||||||
TMPC0402HP-220MG-Z02 | 22.00 | 1.20 | 1.40 | 470.0 | 500 | ||||||||
Molding Type Power Inductor TMPC0512HP Series |
|||||||||||||
Part Number | Inductance L0 (uH)±20% | I rms (A) typ. | I sat (A) typ. | DCR (mΩ)typ.@25℃ | DCR (mΩ)max.@25℃ | ||||||||
TMPC0512HP-R10YG-D | 0.10±30% | 14.00 | 14.50 | 4.3 | 5.2 | ||||||||
TMPC0512HP-R47MG-D | 0.47 | 7.00 | 11.00 | 13.6 | 15.8 | ||||||||
TMPC0512HP-R68MG-D | 0.68 | 6.00 | 9.00 | 21.5 | 24.5 | ||||||||
TMPC0512HP-1R0MG-D | 1.00 | 5.00 | 6.00 | 26.0 | 30 | ||||||||
TMPC0512HP-2R2MG-D | 2.20 | 3.50 | 4.00 | 65.0 | 75 | ||||||||
TMPC0512HP-3R3MG-D | 3.30 | 3.00 | 3.80 | 75.0 | 86 | ||||||||
TMPC0512HP-4R7MG-D | 4.70 | 2.50 | 3.20 | 100.0 | 115 | ||||||||
TMPC0512HP-5R6MG-D | 5.60 | 2.40 | 3.20 | 175.0 | 201 | ||||||||
TMPC0512HP-6R8MG-D | 6.80 | 2.00 | 3.00 | 193.0 | 222 | ||||||||
TMPC0512HP-100MG-D | 10.00 | 1.50 | 1.80 | 335.0 | 385 | ||||||||
Molding Type Power Inductor TMPC0602H Series |
|||||||||||||
Part Number | Inductance L0 (uH)±20% | I rms (A) typ. | I sat (A) typ. | DCR (mΩ)typ.@25℃ | DCR (mΩ)max.@25℃ | ||||||||
TMPC0602H-R10YG-D | 0.10±30% | 14.00 | 14.50 | 4.3 | 5.2 | ||||||||
TMPC0602H-R10YG-D | 0.47 | 7.00 | 11.00 | 13.6 | 15.8 | ||||||||
TMPC0602H-R10YG-D | 0.68 | 6.00 | 9.00 | 21.5 | 24.5 | ||||||||
TMPC0602H-R10YG-D | 1.00 | 5.00 | 6.00 | 26.0 | 30 | ||||||||
TMPC0602H-R10YG-D | 2.20 | 3.50 | 4.00 | 65.0 | 75 | ||||||||
TMPC0602H-R10YG-D | 3.30 | 3.00 | 3.80 | 75.0 | 86 | ||||||||
TMPC0602H-R10YG-D | 4.70 | 2.50 | 3.20 | 100.0 | 115 | ||||||||
TMPC0602H-R10YG-D | 5.60 | 2.40 | 3.20 | 175.0 | 201 | ||||||||
TMPC0602H-R10YG-D | 6.80 | 2.00 | 3.00 | 193.0 | 222 | ||||||||
TMPC0602H-R10YG-D | 10.00 | 1.50 | 1.80 | 335.0 | 385 | ||||||||
TMPC0602H-220MG-D | 22.00 | 1.50 | 2.50 | 236.0 | 280 | ||||||||
Molding Type Power Inductor TMPC0605H Series |
|||||||||||||
Part Number | Inductance L0 (uH)±20% | I rms (A) typ. | I sat (A) typ. | DCR (mΩ)typ.@25℃ | DCR (mΩ)max.@25℃ | ||||||||
TMPC0605H-R33MG-D | 0.33 | 25.00 | 32.00 | 2.5 | 3 | ||||||||
TMPC0605H-R47MG-D | 0.47 | 22.00 | 30.00 | 3.5 | 3.9 | ||||||||
TMPC0605H-R68MG-D | 0.68 | 18.00 | 24.00 | 4.0 | 4.5 | ||||||||
TMPC0605H-1R0MG-D | 1.00 | 15.00 | 20.00 | 6.1 | 6.5 | ||||||||
TMPC0605H-2R2MG-D | 2.20 | 10.00 | 14.00 | 11.2 | 12 | ||||||||
TMPC0605H-3R3MG-D | 3.30 | 8.00 | 12.00 | 19.0 | 20.9 | ||||||||
TMPC0605H-4R7MG-D | 4.70 | 6.50 | 10.00 | 28.0 | 30.8 | ||||||||
TMPC0605H-5R6MG-D | 5.60 | 6.00 | 9.00 | 43.5 | 49 | ||||||||
TMPC0605H-6R8MG-D | 6.80 | 5.50 | 8.50 | 46.0 | 51.5 | ||||||||
TMPC0605H-100MG-D | 10.00 | 4.00 | 7.50 | 60.0 | 69 | ||||||||
TMPC0605H-220MG-D | 22.00 | 2.50 | 5.50 | 140.0 | 170 | ||||||||
Molding Type Power Inductor TMPC1004H Series |
|||||||||||||
Part Number | Inductance L0 (uH)±20% | I rms (A) typ. | I sat (A) typ. | DCR (mΩ)typ.@25℃ | DCR (mΩ)max.@25℃ | ||||||||
TMPC1004H-R15YG-D | 0.15±30% | 43.00 | 75.00 | 0.5 | 0.6 | ||||||||
TMPC1004H-R47MG-D | 0.47 | 28.00 | 43.00 | 1.3 | 1.5 | ||||||||
TMPC1004H-R68MG-D | 0.68 | 22.00 | 39.00 | 2.4 | 2.7 | ||||||||
TMPC1004H-1R0MG-D | 1.00 | 18.00 | 36.00 | 3.0 | 3.3 | ||||||||
TMPC1004H-2R2MG-D | 2.20 | 12.00 | 27.00 | 6.5 | 7 | ||||||||
TMPC1004H-3R3MG-D | 3.30 | 11.00 | 20.00 | 10.8 | 11.8 | ||||||||
TMPC1004H-4R7MG-D | 4.70 | 10.00 | 17.00 | 15.0 | 15.5 | ||||||||
TMPC1004H-5R6MG-D | 5.60 | 9.00 | 14.00 | 17.0 | 19.3 | ||||||||
TMPC1004H-6R8MG-D | 6.80 | 8.50 | 13.50 | 17.5 | 23.3 | ||||||||
TMPC1004H-8R2MG-D | 8.20 | 8.00 | 12.50 | 20.0 | 22.5 | ||||||||
TMPC1004H-100MG-D | 10.00 | 7.50 | 12.00 | 27.0 | 30 | ||||||||
TMPC1004H-200MG-D | 22.00 | 5.00 | 7.00 | 64.0 | 74 | ||||||||
|
Remark:
Special inquiries besides the above common used types can be met on your requirement.
150uh smd inductor
SMD Molding power choke
Product detail pictures:
Related Product Guide:
VIDEO: Transformer explodes while reporter gets ready for live shot | Small Electrical Transformer
Global Power Choke Market Report to Share Key Aspects of the Industry with the details of Influence Factors | Power Smd Inductor
We have state-of-the-art tools. Our products are exported towards the USA, the UK and so on, enjoying a fantastic reputation amongst customers for Lowest Price for Small Inductor Hollow Axial Coil - SMD molding Power Inductor -SGT | GETWELL – Getwell, The product will supply to all over the world, such as: Sudan, Italy, Seattle, We have established long-term, stable and good business relationships with many manufacturers and wholesalers around the world. Currently, we are looking forward to even greater cooperation with overseas customers based on mutual benefits. Please feel free to contact us for more details.
By Constance from belarus - 2018.09.21 11:01
The after-sale warranty service is timely and thoughtful, encounter problems can be resolved very quickly, we feel reliable and secure.
By Elaine from Jordan - 2017.12.31 14:53