Manhattan Webcam Caught Entire Alien-Looking Glow From Con Ed Transformer Explosion | Inductor Color Codes

All of the wireless charging pads we've tested in this guide are Qi-compatible, so you'll need a Qi-compatible smartphone to use them. Many recent flagship smartphones including the iPhone 8, iPhone X, iPhone XS, Galaxy S10, and Pixel 3 support Qi-wireless charging. If you have a smartphone that came out in the last two years, it probably supports wireless charging through the Qi standard.

Thermal direct joining only proves to be efficient if the metal is heated and cooled very quickly. This can be done flexibly by short-term heating using laser radiation. Similar to a surface-hardening process, the metal is heated from the side facing away from the joint. The rapid heating of any surfaces is possible by the combination of a fast, controllable power laser in the 800–1100 nm range and a scanner optic. FIGURE 3 shows the stiffening structure of a middle armrest made of fiber-reinforced PA6 and mild steel. Here, the welding assembly and the cover plates were connected to an organo sheet by means of laser heating.

— The oldest and smallest project on the shore is Mohawk Point. Its six wind turbines started producing 10MW for owner International Power Canada in 2008.

During his catwalk display for Virgil Abloh's Off-White show in Paris, Playboi Carti debuted a new look on the runway. The focus was meant to be on the sweatshirt he was rocking but people were also interested in Carti's bleached locks. Travis Scott is rocking a similar look these days, coloring his usually black hair blond as well. 

Abstract: A method of threat detection includes illuminating a scene with short-wavelength infrared (SWIR) illumination and receiving a return of the SWIR illumination reflected back from the scene. The method includes analyzing the return of the SWIR illumination to detect presence of man-made optics in the scene. Illuminating, receiving, and analyzing can be performed by a device, e.g., a rifle-mounted laser device.

Another aspect of that technology is the high reproducibility which allows the end-user to swap inductors with no or limited setting. That brings a clear gain in time.

[G06F] ELECTRIC DIGITAL DATA PROCESSING (computer systems based on specific computational models G06N)

I suppose hookup wire was also omitted . But seriously, I think the purpose of this article was to outline components whose primary function is to provide a static resistance. Components that are resistive as a side effect of heating (nichrome, tungsten filaments) deserve an article unto themselves, and components that map some input value to resistance (photoresistors, flex sensors, temperature sensors) are so varied as to defy classification in a single article.

At least where I grew up, RS employees in the olden days didn’t “know their stuff” any better than they did in the final days.

The underlying goal of Qi's wireless charging technique is to power the compatible mobile device only to 100 percent. The receiving device and the base constantly communicate through signals that tell the base how much more power is necessary to power the mobile device's battery in full. Once that's achieved, the base essentially goes into standby mode, automatically stopping its transfer of power.

Not sure which one you’re looking for, but it has plenty of them. Ask it for “distance 9.8 m/s^2 acceleration for 10 seconds”, and it’ll tell you 490 meters. Ask it for “projectile range 45 degrees 7.0 m/s” and it’ll tell you “4.997 meters”. It has the math for more complicated ones as well (elastic/inelastic collisions, etc.) but I don’t know how you’d enter it as a single search term.

Inventor(s): Masahiro Yoshioka (Allen, TX), Michael Snedeker (Tucson, AZ) Assignee(s): TEXAS INSTRUMENTS INCORPORATED (Dallas, TX) Law Firm: No Counsel Application No., Date, Speed: 15794933 on 10/26/2017 (439 days app to issue)