Fast delivery Electrical Testing Transformer - SMD molding Power Inductor -SGT | GETWELL – Getwell
Fast delivery Electrical Testing Transformer - SMD molding Power Inductor -SGT | GETWELL – Getwell Detail:
SMD Molding power choke feature & characteristic:
◆high current rating
◆high frequency range up to 5 MHz
◆very low DC resistance
◆shielded construction
◆low noise
◆ultra low cost
◆Rohs compliant
Application:
◆PDA/Notebook/Desktop/Server applications
◆DC/DC comverter
◆inductor for general purpose use
Inductor smd datasheet
Part Number | A(mm) | B(mm) | C(mm) | D(mm) | E(mm) | SPQ | |||||||
0312 | 3.50±0.20 | 3.2±0.20 | 1.00±0.20 | 0.70±0.20 | 1.20±0.20 | 4K | |||||||
0302 | 3.50±0.20 | 3.2±0.20 | 1.80±0.20 | 0.70±0.20 | 1.20±0.20 | 3K | |||||||
0412 | 4.45±0.25 | 4.06±0.25 | 1.00±0.20 | 0.76±0.30 | 2.00±0.20 | 3K | |||||||
0402 | 4.45±0.25 | 4.06±0.25 | 1.80±0.20 | 0.76±0.30 | 2.00±0.20 | 4K | |||||||
0512 | 5.70±0.30 | 5.20±0.20 | 1.00±0.20 | 1.10±0.30 | 2.50±0.30 | 3K | |||||||
0515 | 5.70±0.30 | 5.20±0.20 | 1.30±0.20 | 1.10±0.30 | 2.50±0.30 | 3.5K | |||||||
0518 | 5.70±0.30 | 5.20±0.20 | 1.60±0.20 | 1.10±0.30 | 2.50±0.30 | 3K | |||||||
0612 | 7.00±0.30 | 6.60±0.30 | 1.00±0.20 | 1.8±0.30 | 3.00±0.30 | 3K | |||||||
0615 | 7.00±0.30 | 6.60±0.30 | 1.30±0.20 | 1.8±0.30 | 3.00±0.30 | 2K | |||||||
0618 | 7.00±0.30 | 6.60±0.30 | 1.60±0.20 | 1.8±0.30 | 3.00±0.30 | 1.5K | |||||||
0602 | 7.00±0.30 | 6.60±0.30 | 1.80±0.20 | 1.8±0.30 | 3.00±0.30 | 1.5K | |||||||
0624 | 7.00±0.30 | 6.60±0.30 | 2.20±0.20 | 1.8±0.30 | 3.00±0.30 | 0.5K | |||||||
0603 | 7.30±0.30 | 6.60±0.30 | 2.80±0.20 | 1.8±0.30 | 3.00±0.30 | 0.5K | |||||||
0605 | 7.30±0.30 | 6.60±0.30 | 4.80±0.20 | 1.8±0.30 | 3.00±0.30 | 0.5K | |||||||
1004 | 11.00±0.50 | 10.00±0.30 | 3.80±0.20 | 2.3±0.30 | 3.00±0.30 | 0.5K | |||||||
1005 | 11.00±0.50 | 10.00±0.30 | 4.80±0.20 | 2.3±0.30 | 3.00±0.30 | 0.5K | |||||||
1235 | 13.50±0.50 | 12.50±0.30 | 3.30±0.20 | 2.3±0.30 | 4.70±0.30 | 0.5K | |||||||
1205 | 13.50±0.50 | 12.50±0.30 | 4.80±0.20 | 2.3±0.30 | 4.70±0.30 | 0.5K | |||||||
1206 | 13.50±0.50 | 12.50±0.30 | 5.70±0.30 | 2.3±0.30 | 4.70±0.30 | 0.5K | |||||||
1265 | 13.50±0.50 | 12.50±0.30 | 6.20±0.30 | 2.3±0.30 | 4.70±0.30 | 0.5K | |||||||
1707 | 17.60±0.40 | 16.90±0.30 | 6.70±0.30 | 2.10±0.30 | 11.90±0.30 | 0.3K | |||||||
Molding Type Power Inductor TMPC0312H Series |
|||||||||||||
Part Number | Inductance L0(uH) | I rms (A) typ. | I sat (A) typ. | DCR (mΩ)typ.@25℃ | DCR (mΩ)max.@25℃ | ||||||||
TMPC0312H-R47MG | 0.47±20% | 5.00 | 7.20 | 25 | 30 | ||||||||
TMPC0312H-R56MG | 0.56±20% | 4.50 | 6.60 | 31 | 36 | ||||||||
TMPC0312H-R68MG | 0.68±20% | 4.00 | 6.10 | 34 | 40 | ||||||||
TMPC0312H-R82MG | 0.82±20% | 3.50 | 5.80 | 41 | 48 | ||||||||
TMPC0312H-1R0MG | 1.00±20% | 3.30 | 5.50 | 50 | 60 | ||||||||
TMPC0312H-1R5MG | 1.50±20% | 3.00 | 4.00 | 71 | 85 | ||||||||
TMPC0312H-2R2MG | 2.20±20% | 2.70 | 3.40 | 98 | 115 | ||||||||
TMPC0312H-3R3MG | 3.30±20% | 2.00 | 3.10 | 191 | 210 | ||||||||
TMPC0312H-4R7MG | 4.70±20% | 1.60 | 2.80 | 266 | 293 | ||||||||
TMPC0312H-5R6MG | 5.60±20% | 1.50 | 2.20 | 310 | 360 | ||||||||
TMPC0312H-6R8MG | 6.80±20% | 1.40 | 2.00 | 360 | 400 | ||||||||
TMPC0312H-8R2MG | 8.20±20% | 1.20 | 1.70 | 420 | 463 | ||||||||
TMPC0312H-100MG | 10.0±20% | 1.00 | 1.40 | 498 | 550 | ||||||||
Molding Type Power Inductor TMPC0302H Series |
|||||||||||||
Part Number | Inductance L0(uH) | I rms (A) typ. | I sat (A) typ. | DCR (mΩ)typ.@25℃ | DCR (mΩ)max.@25℃ | ||||||||
TMPC0302H-R10YG | 0.10±30% | 10.50 | 14.00 | 6.6 | 9 | ||||||||
TMPC0302H-R47MG | 0.47±20% | 7.00 | 9.00 | 19.7 | 23 | ||||||||
TMPC0302H-R68MG | 0.68±20% | 5.50 | 7.00 | 25.5 | 29 | ||||||||
TMPC0302H-1R0MG | 1.00±20% | 4.00 | 5.00 | 32.0 | 38 | ||||||||
TMPC0302H-2R2MG | 2.20±20% | 3.50 | 3.70 | 65.0 | 75 | ||||||||
TMPC0302H-3R3MG | 3.30±20% | 3.00 | 3.50 | 125.0 | 145 | ||||||||
TMPC0302H-4R7MG | 4.70±20% | 2.60 | 3.00 | 172.0 | 200 | ||||||||
TMPC0302H-5R6MG | 5.60±20% | 2.20 | 2.60 | 205.0 | 238 | ||||||||
TMPC0302H-6R8MG | 6.80±20% | 1.90 | 2.20 | 260.0 | 300 | ||||||||
TMPC0302H-100MG | 10.0±20% | 1.40 | 1.60 | 366.0 | 422 | ||||||||
Molding Type Power Inductor TMPC0402HP Series |
|||||||||||||
Part Number | Inductance L0 (uH)±20% | I rms (A) typ. | I sat (A) typ. | DCR (mΩ)typ.@25℃ | DCR (mΩ)max.@25℃ | ||||||||
TMPC0402HP-R33MG-Z02 | 0.33 | 10.00 | 18.00 | 7.8 | 8.6 | ||||||||
TMPC0402HP-R47MG-Z02 | 0.47 | 8.00 | 12.00 | 11.2 | 14 | ||||||||
TMPC0402HP-R68MG-Z02 | 0.68 | 7.00 | 10.00 | 16.0 | 19 | ||||||||
TMPC0402HP-1R0MG-Z02 | 1.00 | 5.00 | 8.50 | 22.0 | 27 | ||||||||
TMPC0402HP-2R2MG-Z02 | 2.20 | 4.00 | 6.00 | 51.0 | 61 | ||||||||
TMPC0402HP-3R3MG-Z02 | 3.30 | 3.50 | 4.00 | 69.0 | 76 | ||||||||
TMPC0402HP-4R7MG-Z02 | 4.70 | 2.60 | 3.50 | 95.0 | 105 | ||||||||
TMPC0402HP-6R8MG-Z02 | 6.80 | 2.10 | 2.80 | 150.0 | 172 | ||||||||
TMPC0402HP-100MG-Z02 | 10.00 | 1.80 | 2.30 | 215.0 | 243 | ||||||||
TMPC0402HP-220MG-Z02 | 22.00 | 1.20 | 1.40 | 470.0 | 500 | ||||||||
Molding Type Power Inductor TMPC0512HP Series |
|||||||||||||
Part Number | Inductance L0 (uH)±20% | I rms (A) typ. | I sat (A) typ. | DCR (mΩ)typ.@25℃ | DCR (mΩ)max.@25℃ | ||||||||
TMPC0512HP-R10YG-D | 0.10±30% | 14.00 | 14.50 | 4.3 | 5.2 | ||||||||
TMPC0512HP-R47MG-D | 0.47 | 7.00 | 11.00 | 13.6 | 15.8 | ||||||||
TMPC0512HP-R68MG-D | 0.68 | 6.00 | 9.00 | 21.5 | 24.5 | ||||||||
TMPC0512HP-1R0MG-D | 1.00 | 5.00 | 6.00 | 26.0 | 30 | ||||||||
TMPC0512HP-2R2MG-D | 2.20 | 3.50 | 4.00 | 65.0 | 75 | ||||||||
TMPC0512HP-3R3MG-D | 3.30 | 3.00 | 3.80 | 75.0 | 86 | ||||||||
TMPC0512HP-4R7MG-D | 4.70 | 2.50 | 3.20 | 100.0 | 115 | ||||||||
TMPC0512HP-5R6MG-D | 5.60 | 2.40 | 3.20 | 175.0 | 201 | ||||||||
TMPC0512HP-6R8MG-D | 6.80 | 2.00 | 3.00 | 193.0 | 222 | ||||||||
TMPC0512HP-100MG-D | 10.00 | 1.50 | 1.80 | 335.0 | 385 | ||||||||
Molding Type Power Inductor TMPC0602H Series |
|||||||||||||
Part Number | Inductance L0 (uH)±20% | I rms (A) typ. | I sat (A) typ. | DCR (mΩ)typ.@25℃ | DCR (mΩ)max.@25℃ | ||||||||
TMPC0602H-R10YG-D | 0.10±30% | 14.00 | 14.50 | 4.3 | 5.2 | ||||||||
TMPC0602H-R10YG-D | 0.47 | 7.00 | 11.00 | 13.6 | 15.8 | ||||||||
TMPC0602H-R10YG-D | 0.68 | 6.00 | 9.00 | 21.5 | 24.5 | ||||||||
TMPC0602H-R10YG-D | 1.00 | 5.00 | 6.00 | 26.0 | 30 | ||||||||
TMPC0602H-R10YG-D | 2.20 | 3.50 | 4.00 | 65.0 | 75 | ||||||||
TMPC0602H-R10YG-D | 3.30 | 3.00 | 3.80 | 75.0 | 86 | ||||||||
TMPC0602H-R10YG-D | 4.70 | 2.50 | 3.20 | 100.0 | 115 | ||||||||
TMPC0602H-R10YG-D | 5.60 | 2.40 | 3.20 | 175.0 | 201 | ||||||||
TMPC0602H-R10YG-D | 6.80 | 2.00 | 3.00 | 193.0 | 222 | ||||||||
TMPC0602H-R10YG-D | 10.00 | 1.50 | 1.80 | 335.0 | 385 | ||||||||
TMPC0602H-220MG-D | 22.00 | 1.50 | 2.50 | 236.0 | 280 | ||||||||
Molding Type Power Inductor TMPC0605H Series |
|||||||||||||
Part Number | Inductance L0 (uH)±20% | I rms (A) typ. | I sat (A) typ. | DCR (mΩ)typ.@25℃ | DCR (mΩ)max.@25℃ | ||||||||
TMPC0605H-R33MG-D | 0.33 | 25.00 | 32.00 | 2.5 | 3 | ||||||||
TMPC0605H-R47MG-D | 0.47 | 22.00 | 30.00 | 3.5 | 3.9 | ||||||||
TMPC0605H-R68MG-D | 0.68 | 18.00 | 24.00 | 4.0 | 4.5 | ||||||||
TMPC0605H-1R0MG-D | 1.00 | 15.00 | 20.00 | 6.1 | 6.5 | ||||||||
TMPC0605H-2R2MG-D | 2.20 | 10.00 | 14.00 | 11.2 | 12 | ||||||||
TMPC0605H-3R3MG-D | 3.30 | 8.00 | 12.00 | 19.0 | 20.9 | ||||||||
TMPC0605H-4R7MG-D | 4.70 | 6.50 | 10.00 | 28.0 | 30.8 | ||||||||
TMPC0605H-5R6MG-D | 5.60 | 6.00 | 9.00 | 43.5 | 49 | ||||||||
TMPC0605H-6R8MG-D | 6.80 | 5.50 | 8.50 | 46.0 | 51.5 | ||||||||
TMPC0605H-100MG-D | 10.00 | 4.00 | 7.50 | 60.0 | 69 | ||||||||
TMPC0605H-220MG-D | 22.00 | 2.50 | 5.50 | 140.0 | 170 | ||||||||
Molding Type Power Inductor TMPC1004H Series |
|||||||||||||
Part Number | Inductance L0 (uH)±20% | I rms (A) typ. | I sat (A) typ. | DCR (mΩ)typ.@25℃ | DCR (mΩ)max.@25℃ | ||||||||
TMPC1004H-R15YG-D | 0.15±30% | 43.00 | 75.00 | 0.5 | 0.6 | ||||||||
TMPC1004H-R47MG-D | 0.47 | 28.00 | 43.00 | 1.3 | 1.5 | ||||||||
TMPC1004H-R68MG-D | 0.68 | 22.00 | 39.00 | 2.4 | 2.7 | ||||||||
TMPC1004H-1R0MG-D | 1.00 | 18.00 | 36.00 | 3.0 | 3.3 | ||||||||
TMPC1004H-2R2MG-D | 2.20 | 12.00 | 27.00 | 6.5 | 7 | ||||||||
TMPC1004H-3R3MG-D | 3.30 | 11.00 | 20.00 | 10.8 | 11.8 | ||||||||
TMPC1004H-4R7MG-D | 4.70 | 10.00 | 17.00 | 15.0 | 15.5 | ||||||||
TMPC1004H-5R6MG-D | 5.60 | 9.00 | 14.00 | 17.0 | 19.3 | ||||||||
TMPC1004H-6R8MG-D | 6.80 | 8.50 | 13.50 | 17.5 | 23.3 | ||||||||
TMPC1004H-8R2MG-D | 8.20 | 8.00 | 12.50 | 20.0 | 22.5 | ||||||||
TMPC1004H-100MG-D | 10.00 | 7.50 | 12.00 | 27.0 | 30 | ||||||||
TMPC1004H-200MG-D | 22.00 | 5.00 | 7.00 | 64.0 | 74 | ||||||||
|
Remark:
Special inquiries besides the above common used types can be met on your requirement.
150uh smd inductor
SMD Molding power choke
Product detail pictures:
Related Product Guide:
Watch Lil Uzi Vert Drop A Freestyle While Dancing mixtapes-icon news-icon songs-icon top100-icon videos-icon x-icon | Power Inductor Coil
Reduce Reactive Grid Currents with Ripple Current Steering Filtering | Power Inductor Coil
Adhering into the basic principle of "quality, assistance, effectiveness and growth", we have attained trusts and praises from domestic and worldwide client for Fast delivery Electrical Testing Transformer - SMD molding Power Inductor -SGT | GETWELL – Getwell, The product will supply to all over the world, such as: Naples, Johor, Sao Paulo, We insist on the principle of "Credit being primary, Customers being the king and Quality being the best", we are looking forward to the mutual cooperation with all friends at home and abroad and we will create a bright future of business.
By David Eagleson from Sudan - 2017.10.27 12:12
Product variety is complete, good quality and inexpensive, the delivery is fast and transport is security, very good, we are happy to cooperate with a reputable company!
By Phoenix from Mombasa - 2017.06.16 18:23