China New Product Air Core Inductors - SMD molding Power Inductor -SGT | GETWELL – Getwell
China New Product Air Core Inductors - SMD molding Power Inductor -SGT | GETWELL – Getwell Detail:
SMD Molding power choke feature & characteristic:
◆high current rating
◆high frequency range up to 5 MHz
◆very low DC resistance
◆shielded construction
◆low noise
◆ultra low cost
◆Rohs compliant
Application:
◆PDA/Notebook/Desktop/Server applications
◆DC/DC comverter
◆inductor for general purpose use
Contact Us And Get Free Samples!NOW!
Write your message here and send it to us
Inductor smd datasheet
| Part Number | A(mm) | B(mm) | C(mm) | D(mm) | E(mm) | SPQ | |||||||
| 0312 | 3.50±0.20 | 3.2±0.20 | 1.00±0.20 | 0.70±0.20 | 1.20±0.20 | 4K | |||||||
| 0302 | 3.50±0.20 | 3.2±0.20 | 1.80±0.20 | 0.70±0.20 | 1.20±0.20 | 3K | |||||||
| 0412 | 4.45±0.25 | 4.06±0.25 | 1.00±0.20 | 0.76±0.30 | 2.00±0.20 | 3K | |||||||
| 0402 | 4.45±0.25 | 4.06±0.25 | 1.80±0.20 | 0.76±0.30 | 2.00±0.20 | 4K | |||||||
| 0512 | 5.70±0.30 | 5.20±0.20 | 1.00±0.20 | 1.10±0.30 | 2.50±0.30 | 3K | |||||||
| 0515 | 5.70±0.30 | 5.20±0.20 | 1.30±0.20 | 1.10±0.30 | 2.50±0.30 | 3.5K | |||||||
| 0518 | 5.70±0.30 | 5.20±0.20 | 1.60±0.20 | 1.10±0.30 | 2.50±0.30 | 3K | |||||||
| 0612 | 7.00±0.30 | 6.60±0.30 | 1.00±0.20 | 1.8±0.30 | 3.00±0.30 | 3K | |||||||
| 0615 | 7.00±0.30 | 6.60±0.30 | 1.30±0.20 | 1.8±0.30 | 3.00±0.30 | 2K | |||||||
| 0618 | 7.00±0.30 | 6.60±0.30 | 1.60±0.20 | 1.8±0.30 | 3.00±0.30 | 1.5K | |||||||
| 0602 | 7.00±0.30 | 6.60±0.30 | 1.80±0.20 | 1.8±0.30 | 3.00±0.30 | 1.5K | |||||||
| 0624 | 7.00±0.30 | 6.60±0.30 | 2.20±0.20 | 1.8±0.30 | 3.00±0.30 | 0.5K | |||||||
| 0603 | 7.30±0.30 | 6.60±0.30 | 2.80±0.20 | 1.8±0.30 | 3.00±0.30 | 0.5K | |||||||
| 0605 | 7.30±0.30 | 6.60±0.30 | 4.80±0.20 | 1.8±0.30 | 3.00±0.30 | 0.5K | |||||||
| 1004 | 11.00±0.50 | 10.00±0.30 | 3.80±0.20 | 2.3±0.30 | 3.00±0.30 | 0.5K | |||||||
| 1005 | 11.00±0.50 | 10.00±0.30 | 4.80±0.20 | 2.3±0.30 | 3.00±0.30 | 0.5K | |||||||
| 1235 | 13.50±0.50 | 12.50±0.30 | 3.30±0.20 | 2.3±0.30 | 4.70±0.30 | 0.5K | |||||||
| 1205 | 13.50±0.50 | 12.50±0.30 | 4.80±0.20 | 2.3±0.30 | 4.70±0.30 | 0.5K | |||||||
| 1206 | 13.50±0.50 | 12.50±0.30 | 5.70±0.30 | 2.3±0.30 | 4.70±0.30 | 0.5K | |||||||
| 1265 | 13.50±0.50 | 12.50±0.30 | 6.20±0.30 | 2.3±0.30 | 4.70±0.30 | 0.5K | |||||||
| 1707 | 17.60±0.40 | 16.90±0.30 | 6.70±0.30 | 2.10±0.30 | 11.90±0.30 | 0.3K | |||||||
| Molding Type Power Inductor TMPC0312H Series |
|||||||||||||
| Part Number | Inductance L0(uH) | I rms (A) typ. | I sat (A) typ. | DCR (mΩ）typ.@25℃ | DCR (mΩ）max.@25℃ | ||||||||
| TMPC0312H-R47MG | 0.47±20% | 5.00 | 7.20 | 25 | 30 | ||||||||
| TMPC0312H-R56MG | 0.56±20% | 4.50 | 6.60 | 31 | 36 | ||||||||
| TMPC0312H-R68MG | 0.68±20% | 4.00 | 6.10 | 34 | 40 | ||||||||
| TMPC0312H-R82MG | 0.82±20% | 3.50 | 5.80 | 41 | 48 | ||||||||
| TMPC0312H-1R0MG | 1.00±20% | 3.30 | 5.50 | 50 | 60 | ||||||||
| TMPC0312H-1R5MG | 1.50±20% | 3.00 | 4.00 | 71 | 85 | ||||||||
| TMPC0312H-2R2MG | 2.20±20% | 2.70 | 3.40 | 98 | 115 | ||||||||
| TMPC0312H-3R3MG | 3.30±20% | 2.00 | 3.10 | 191 | 210 | ||||||||
| TMPC0312H-4R7MG | 4.70±20% | 1.60 | 2.80 | 266 | 293 | ||||||||
| TMPC0312H-5R6MG | 5.60±20% | 1.50 | 2.20 | 310 | 360 | ||||||||
| TMPC0312H-6R8MG | 6.80±20% | 1.40 | 2.00 | 360 | 400 | ||||||||
| TMPC0312H-8R2MG | 8.20±20% | 1.20 | 1.70 | 420 | 463 | ||||||||
| TMPC0312H-100MG | 10.0±20% | 1.00 | 1.40 | 498 | 550 | ||||||||
| Molding Type Power Inductor TMPC0302H Series |
|||||||||||||
| Part Number | Inductance L0(uH) | I rms (A) typ. | I sat (A) typ. | DCR (mΩ）typ.@25℃ | DCR (mΩ）max.@25℃ | ||||||||
| TMPC0302H-R10YG | 0.10±30% | 10.50 | 14.00 | 6.6 | 9 | ||||||||
| TMPC0302H-R47MG | 0.47±20% | 7.00 | 9.00 | 19.7 | 23 | ||||||||
| TMPC0302H-R68MG | 0.68±20% | 5.50 | 7.00 | 25.5 | 29 | ||||||||
| TMPC0302H-1R0MG | 1.00±20% | 4.00 | 5.00 | 32.0 | 38 | ||||||||
| TMPC0302H-2R2MG | 2.20±20% | 3.50 | 3.70 | 65.0 | 75 | ||||||||
| TMPC0302H-3R3MG | 3.30±20% | 3.00 | 3.50 | 125.0 | 145 | ||||||||
| TMPC0302H-4R7MG | 4.70±20% | 2.60 | 3.00 | 172.0 | 200 | ||||||||
| TMPC0302H-5R6MG | 5.60±20% | 2.20 | 2.60 | 205.0 | 238 | ||||||||
| TMPC0302H-6R8MG | 6.80±20% | 1.90 | 2.20 | 260.0 | 300 | ||||||||
| TMPC0302H-100MG | 10.0±20% | 1.40 | 1.60 | 366.0 | 422 | ||||||||
| Molding Type Power Inductor TMPC0402HP Series |
|||||||||||||
| Part Number | Inductance L0 (uH)±20% | I rms (A) typ. | I sat (A) typ. | DCR (mΩ）typ.@25℃ | DCR (mΩ）max.@25℃ | ||||||||
| TMPC0402HP-R33MG-Z02 | 0.33 | 10.00 | 18.00 | 7.8 | 8.6 | ||||||||
| TMPC0402HP-R47MG-Z02 | 0.47 | 8.00 | 12.00 | 11.2 | 14 | ||||||||
| TMPC0402HP-R68MG-Z02 | 0.68 | 7.00 | 10.00 | 16.0 | 19 | ||||||||
| TMPC0402HP-1R0MG-Z02 | 1.00 | 5.00 | 8.50 | 22.0 | 27 | ||||||||
| TMPC0402HP-2R2MG-Z02 | 2.20 | 4.00 | 6.00 | 51.0 | 61 | ||||||||
| TMPC0402HP-3R3MG-Z02 | 3.30 | 3.50 | 4.00 | 69.0 | 76 | ||||||||
| TMPC0402HP-4R7MG-Z02 | 4.70 | 2.60 | 3.50 | 95.0 | 105 | ||||||||
| TMPC0402HP-6R8MG-Z02 | 6.80 | 2.10 | 2.80 | 150.0 | 172 | ||||||||
| TMPC0402HP-100MG-Z02 | 10.00 | 1.80 | 2.30 | 215.0 | 243 | ||||||||
| TMPC0402HP-220MG-Z02 | 22.00 | 1.20 | 1.40 | 470.0 | 500 | ||||||||
| Molding Type Power Inductor TMPC0512HP Series |
|||||||||||||
| Part Number | Inductance L0 (uH)±20% | I rms (A) typ. | I sat (A) typ. | DCR (mΩ）typ.@25℃ | DCR (mΩ）max.@25℃ | ||||||||
| TMPC0512HP-R10YG-D | 0.10±30% | 14.00 | 14.50 | 4.3 | 5.2 | ||||||||
| TMPC0512HP-R47MG-D | 0.47 | 7.00 | 11.00 | 13.6 | 15.8 | ||||||||
| TMPC0512HP-R68MG-D | 0.68 | 6.00 | 9.00 | 21.5 | 24.5 | ||||||||
| TMPC0512HP-1R0MG-D | 1.00 | 5.00 | 6.00 | 26.0 | 30 | ||||||||
| TMPC0512HP-2R2MG-D | 2.20 | 3.50 | 4.00 | 65.0 | 75 | ||||||||
| TMPC0512HP-3R3MG-D | 3.30 | 3.00 | 3.80 | 75.0 | 86 | ||||||||
| TMPC0512HP-4R7MG-D | 4.70 | 2.50 | 3.20 | 100.0 | 115 | ||||||||
| TMPC0512HP-5R6MG-D | 5.60 | 2.40 | 3.20 | 175.0 | 201 | ||||||||
| TMPC0512HP-6R8MG-D | 6.80 | 2.00 | 3.00 | 193.0 | 222 | ||||||||
| TMPC0512HP-100MG-D | 10.00 | 1.50 | 1.80 | 335.0 | 385 | ||||||||
| Molding Type Power Inductor TMPC0602H Series |
|||||||||||||
| Part Number | Inductance L0 (uH)±20% | I rms (A) typ. | I sat (A) typ. | DCR (mΩ）typ.@25℃ | DCR (mΩ）max.@25℃ | ||||||||
| TMPC0602H-R10YG-D | 0.10±30% | 14.00 | 14.50 | 4.3 | 5.2 | ||||||||
| TMPC0602H-R10YG-D | 0.47 | 7.00 | 11.00 | 13.6 | 15.8 | ||||||||
| TMPC0602H-R10YG-D | 0.68 | 6.00 | 9.00 | 21.5 | 24.5 | ||||||||
| TMPC0602H-R10YG-D | 1.00 | 5.00 | 6.00 | 26.0 | 30 | ||||||||
| TMPC0602H-R10YG-D | 2.20 | 3.50 | 4.00 | 65.0 | 75 | ||||||||
| TMPC0602H-R10YG-D | 3.30 | 3.00 | 3.80 | 75.0 | 86 | ||||||||
| TMPC0602H-R10YG-D | 4.70 | 2.50 | 3.20 | 100.0 | 115 | ||||||||
| TMPC0602H-R10YG-D | 5.60 | 2.40 | 3.20 | 175.0 | 201 | ||||||||
| TMPC0602H-R10YG-D | 6.80 | 2.00 | 3.00 | 193.0 | 222 | ||||||||
| TMPC0602H-R10YG-D | 10.00 | 1.50 | 1.80 | 335.0 | 385 | ||||||||
| TMPC0602H-220MG-D | 22.00 | 1.50 | 2.50 | 236.0 | 280 | ||||||||
| Molding Type Power Inductor TMPC0605H Series |
|||||||||||||
| Part Number | Inductance L0 (uH)±20% | I rms (A) typ. | I sat (A) typ. | DCR (mΩ）typ.@25℃ | DCR (mΩ）max.@25℃ | ||||||||
| TMPC0605H-R33MG-D | 0.33 | 25.00 | 32.00 | 2.5 | 3 | ||||||||
| TMPC0605H-R47MG-D | 0.47 | 22.00 | 30.00 | 3.5 | 3.9 | ||||||||
| TMPC0605H-R68MG-D | 0.68 | 18.00 | 24.00 | 4.0 | 4.5 | ||||||||
| TMPC0605H-1R0MG-D | 1.00 | 15.00 | 20.00 | 6.1 | 6.5 | ||||||||
| TMPC0605H-2R2MG-D | 2.20 | 10.00 | 14.00 | 11.2 | 12 | ||||||||
| TMPC0605H-3R3MG-D | 3.30 | 8.00 | 12.00 | 19.0 | 20.9 | ||||||||
| TMPC0605H-4R7MG-D | 4.70 | 6.50 | 10.00 | 28.0 | 30.8 | ||||||||
| TMPC0605H-5R6MG-D | 5.60 | 6.00 | 9.00 | 43.5 | 49 | ||||||||
| TMPC0605H-6R8MG-D | 6.80 | 5.50 | 8.50 | 46.0 | 51.5 | ||||||||
| TMPC0605H-100MG-D | 10.00 | 4.00 | 7.50 | 60.0 | 69 | ||||||||
| TMPC0605H-220MG-D | 22.00 | 2.50 | 5.50 | 140.0 | 170 | ||||||||
| Molding Type Power Inductor TMPC1004H Series |
|||||||||||||
| Part Number | Inductance L0 (uH)±20% | I rms (A) typ. | I sat (A) typ. | DCR (mΩ）typ.@25℃ | DCR (mΩ）max.@25℃ | ||||||||
| TMPC1004H-R15YG-D | 0.15±30% | 43.00 | 75.00 | 0.5 | 0.6 | ||||||||
| TMPC1004H-R47MG-D | 0.47 | 28.00 | 43.00 | 1.3 | 1.5 | ||||||||
| TMPC1004H-R68MG-D | 0.68 | 22.00 | 39.00 | 2.4 | 2.7 | ||||||||
| TMPC1004H-1R0MG-D | 1.00 | 18.00 | 36.00 | 3.0 | 3.3 | ||||||||
| TMPC1004H-2R2MG-D | 2.20 | 12.00 | 27.00 | 6.5 | 7 | ||||||||
| TMPC1004H-3R3MG-D | 3.30 | 11.00 | 20.00 | 10.8 | 11.8 | ||||||||
| TMPC1004H-4R7MG-D | 4.70 | 10.00 | 17.00 | 15.0 | 15.5 | ||||||||
| TMPC1004H-5R6MG-D | 5.60 | 9.00 | 14.00 | 17.0 | 19.3 | ||||||||
| TMPC1004H-6R8MG-D | 6.80 | 8.50 | 13.50 | 17.5 | 23.3 | ||||||||
| TMPC1004H-8R2MG-D | 8.20 | 8.00 | 12.50 | 20.0 | 22.5 | ||||||||
| TMPC1004H-100MG-D | 10.00 | 7.50 | 12.00 | 27.0 | 30 | ||||||||
| TMPC1004H-200MG-D | 22.00 | 5.00 | 7.00 | 64.0 | 74 | ||||||||
|
|||||||||||||
Remark:
Special inquiries besides the above common used types can be met on your requirement.
150uh smd inductor
SMD Molding power choke
People also ask：
1.What Are The Advantages Of Chip Inductors
2. The difference between inductor and ordinary inductor
3. Overview of Inductance Properties
4. Causes of failure of patch power inductor
5. Choose the appropriate inductor for switching power supply
6. The influence of the number of differential mode inductors
Learn more about GETWELL products
Wire wound chip inductors
Multilayer chip ceramics inductors
power supply inductor-SGA73
Product detail pictures:
Related Product Guide:
Where crop spray chemical goes, clean those | Small Electrical Transformer
Perfect Induction Heating Achieved Through Custom Manufacturing | Power Inductor Coil
We now have our own gross sales team, style and design workforce, technical crew, QC workforce and package group. We now have strict quality manage procedures for each system. Also, all of our workers are experienced in printing industry for China New Product Air Core Inductors - SMD molding Power Inductor -SGT | GETWELL – Getwell, The product will supply to all over the world, such as: Paris, Salt Lake City, Leicester, We guarantee that our company will try our best to reduce customer purchase cost , shorten the period of purchase , stable merchandise quality , increase customers' satisfaction and achieve win-win situation .
By Rita from The Swiss - 2018.02.04 14:13
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Myra from Belgium - 2018.07.26 16:51
